SCALE INHIBITOR STICK™ – WST

 

 

SCALE INHIBITOR STICKS™ contain chemicals that help prevent carbonate types of scale from depositing down holes in oil and gas wells, casing, tubing, and flow lines.  It is also very useful to include ACID STICKS^® in this type of treatment since the ACID STICK^® will remove carbonate types of scale after being deposited and also neutralizing scale that is in the solution.

 

The SCALE INHIBITOR STICK™ (type WST) is a water soluble tube with salt caps and filled with scale inhibitor and dispersing agent.  This product does not begin to degrade until the temperature reaches 140ºF unless it is falling in water.  In water it will dissolve faster; however, the scale inhibitor inside the tube dissolves very slowly.

 

Treatment using the SCALE INHIBITOR STICK™ varies with the volume of water being produced and should be adjusted for high volume wells.  In many cases one (1) or two (2) sticks every other day may be sufficient.  Occasional use of ACID STICKS^® will also be helpful.

 

For sufficient use, sticks should be placed as close as possible to source of scaling water.

 

SCALE INHIBITOR STICKS™ are non-toxic, but should be handled and treated like any chemical product.  Avoid contact with eyes and skin. Dispose of stick in prescribed manner according to local and federal regulations.

 

 

 

 

 

 

 

 

 

DISCLAIMER OF LIABILITY

The information in this bulletin is believed to be accurate, however all recommendations are made without warranty since the conditions of use are beyond Select Industries, Inc. control.  Select Industries, Inc. disclaims any liability in connection with the use of the information, and does not warrant against infringement by reason of the use of any of its’ products in combination with any other material or in any process.